Auto detailing is a specialized activity which maintains the car in its optimum condition, most often by removing all visible and unseen contaminants from its interior, as well as polishing the surface to a nice, fresh finish. Though it involves a lot of work, auto detailing professionals enjoy their job and derive great satisfaction from meeting the desires of their customers. The work of a detail supervisor is not only confined to car detailing but encompasses everything from engine tuning and performance, to tire care and renewal. The work environment in a car detailing shop is usually one of cleanliness and neatness, with trained professionals striving to make the space both appealing and safe for both himself and his fellow employees.
Detailing professionals use different methods to remove dirt and other visible contaminants from your car or truck: they can use an auto detailing spray on foam, for instance, which is used to wipe away all loose wax, as well as dry cleaning methods, which require detailed vacuuming and extraction of dirt and debris. The most popular car detailing services, however, utilize both techniques, wax and dry cleaning, to ensure that your vehicle is restored to pristine condition. Regardless of what technique is used to deal with your car’s exterior, it’s important to hire professionals with sufficient experience and skills, who can provide you with the best possible service at reasonable rates.
The first step in car cleaning is washing, which usually requires rinsing and a pre-spray of car wash soap, as well as a rinse of water. Once this has been done, a detailing clay bar is used to apply wax or detailing paste, which will penetrate deeply into the pad and restore the luster and shine to the car. After this is applied and dried, it’s time to polish the area, using either a dry cloth or polishing pads. For areas such as the hood, you’ll need to use a special auto detailing towel, which can be placed over the hood to protect it while it is being cleaned, but which can also remove any suds that may have gathered. Dry cleaning only requires a soft dry cotton cloth and a sponge, and the same process is followed.
After the tires are washed and dry, another step in the detailing process is the waxing. Most detailing shops will use an automatic, rotary-motor unit to apply wax, which can then be wiped away with a dry cloth. If you want more refined results, you can opt for machine-silicone-based wax, which is less messy and generally holds up better over time. Automotive suppliers and manufacturers recommend a minimum wax level of 400 to give your tires maximum protection against road grime, salt spray, or moisture.
If your car has minor dents, scratches, or other blemishes, you can eliminate them with a special car detailing paste. This paste goes on like paint and protects the area you want it to, protecting it from future staining. It is very easy to apply, and you don’t have to sand or polish – simply rub it on! Be sure to get rid of any excess paste before washing. Headlight restoration is done in much the same way, except that instead of paint, you’re washing out the existing fog and dust on your headlights.
One of the final steps in the auto detailing process is to carefully clean the car exterior of any remaining dirt or debris that you weren’t able to remove during the car wash or during the headlight restoration process. Professional auto detailers use specialized cleaning products and equipment to make sure that they don’t ruin your car’s finish, so you’ll want to be sure to choose one of those products if you are concerned about leaving anything behind. Also be aware that you may have to go to a professional car detailing services in St. Petersburg if your car is dirty beyond reasonable levels of cleaning. For most aspects of detailing your car, hiring a professional to do it for you is the best way to go.